Lanier 5222, Operator'S Manual

Page: 57 / 102

Configuring Macintosh
Macintosh Configuration 5 - 1
Configuring Macintosh
Note: To print from a Macintosh, the optional PostScript 3 is required.
Changing to EtherTalk
Follow these steps to configure a Macintosh computer to use EtherTalk.
1
Open [Control Panels], and double-click the [AppleTalk] icon.
2
Select “Ethernet” from the [Connect via] pop-up menu.
3
If you change zones, select a name from the [zone] pop-up menu.
4
Close the [AppleTalk] control panels.
5
Restart the Macintosh.
This chapter explains how to configure a network printer in a Macintosh EtherTalk
environment. The actual procedures to configure a network printer are slightly different
depending on the version of the Mac OS. This chapter describes how to configure your printer
for Mac OS 8. If you are using a different version, refer to the manual that comes with your
version of the Mac OS for more information.
Basic Procedure
Changing to EtherTalk
Configuring the Printer
Changing Printer Names
Changing Zone