UL File# MH19366
15
Operation cont’d
TYPICAL OPERATION SEQUENCE
ACTION
RESULT
Turn power switch to ON.
Control panel comes on, display says
“SELECT PRODUCT OR READ/CLEAR
TO PROGRAM
.
Press a product button.
Display says
“PRODUCT X PREHEATING
TO XXX F”.
Motor starts and oven begins
preheating to the programmed
temperature.
Beeper sounds briefly.
Display says
“READY SELECT
PRODUCT TO START ”
.
Open the oven doors and load the product.
Close the door and press the product
button again.
Beeper sounds briefly and display says
“SELECT OVEN SHELVES PRODUCT
X”
.
Press the shelf button(s) which correspond
to the shelf positions, which the product is
loaded (A equals the top shelf and E
equals the bottom shelf).
Display shows a countdown timer and
begins to count toward zero.
Beeper sounds continuously.
Display shows
“DONE PRESS SHELF
BUTTON X, REMOVE PRODUCT”
, shelf
button(s) flash.
Press the
flashing
shelf button(s).
Beeper stops. Display shows “
READY
SELECT PRODUCT TO START
” if no
other shelves carry product or resume
count down for shelves that still have
product cooking.
Open oven door and remove the product,
which corresponds to flashing shelf
button(s).
