![background image](http://html1.mh-extra.com/html/lang/gcod-ap/gcod-ap_installation-and-operation-instructions-manual_674629009.webp)
9
INSTALLATION cont.
Stacking the Ovens
Remove all the plug buttons from the top of the lower oven.
Remove the stacking kit from the oven compartment of one oven and install the 1 1/4-inch plastic
bushing into the top of the lower oven.
Tip the top oven backwards and install two 3/8-inch socket head bolts, found in the stacking kit,
into the two front leg holes that match the holes in the top of the lower oven. Install the socket
head bolts with the heads of the bolt pointing away from the oven.
Lift the top oven and gently set on top of the lower oven so that the heads of the socket head
bolts nest into the holes in the top of the lower oven.
NOTE: Each unit must have separate electrical connections
Flu Installation
A flu extension must be installed on the upper oven of a stacked set.
The extension directs the heat of the lower unit away
from the motor of the upper unit. Without this installed,
the upper unit can experience problems including
premature motor failure.
This extension must be installed.
The ovens may now be set into position.
Be careful if sliding the ovens, they are
not designed to slide over cracks or
obstructions in the floor.
Button Plugs
Stacking Bolts
Upper Oven
Lower Oven
IL1566b
Flue Extension
Back Panel
(Top Unit)