![background image](http://html1.mh-extra.com/html/lang/gcod-ap/gcod-ap_installation-and-operation-instructions-manual_674629005.webp)
5
EQUIPMENT DESCRIPTION
Exterior Construction
The oven exterior dimensions are listed in the Specification Section. The Top, Front, Back, and Sides
are constructed of heavy duty 430 stainless steel, with an attractive No. 4 finish.
The ovens simultaneous-onening heavy duty doors come standard with double pane windows.
The door handle is constructed of Stainless Steel and Phonolic Tubing.
The oven cavity is insulated with high temperature insulation for efficiency and reduced heat loss.
Interior Construction
The GCOF oven cavity dimensions are 29” (72.5 cm) Wide, 20” (50.84 cm) High, 21” (53.38 cm) Deep.
The GCOD oven cavity dimensions are 29” (72.5 cm) Wide, 20” (50.84 cm) High, 27” (53.38 cm) Deep.
The interior of the oven is constructed of porcelainized stainless steel.
Operation
The GCOD-AP and GCOF-AP ovens are forced air convection ovens with a vented oven cavity.
The air is driven by a 1/3 HP fan motor.
Controls
Easy to use manual control knobs.
Solid state temperature sensing and controls.
Pulse and two-speed fan.
Technical
The GCOD-AP and GCOF-AP ovens has electronic ignition and requires a 120V single-phase
connection.
Floor space required is 48” (122.6 cm) wide, 44” (112.5 cm) deep.
The oven weighs 500 lbs.
Contact the factory for correct orifice sizes when installing oven above 4000 ft.
NOTICE
The data plate is on the back side of the oven above the power cord.
The oven voltage, wattage, serial number, wire size, and clearance
specifications are on the data plate. This information should
be carefully read and understood before proceeding with the
installation.
W
Door Handle
Controls
Steam Valve
Cover
Side Access
Panel
Blower
Wheel
H
D
IL1567A