13
INITIAL START UP
Pre-Power On
After the oven is installed and connected to power, prior to turning on, verify the following:
•
The doors open and close freely.
•
All racks are in the oven correctly.
•
All packing materials have been removed from the inside of the oven.
•
All power and gas connections are tight.
Power On
The pilot burner is electronically ignited. When the oven power switch is turned On the pilot will light.
There is a lockout safety feature on the spark ignition module. If, during the initial start-up, the pilot does
not light within 30 seconds the module will turn off all gas to the pilot burner. To reset the spark module,
turn Off the power switch for 10 seconds then turn the switch back On. This may need to be repeated
several times during the initial start-up until gas is present at the pilot burner.
NOTICE
During the first few hours of operation you may notice a small
amount of smoke coming off the oven, and a faint odor from the
smoke. This is normal for a new oven and will disappear after the
first few hours of use.
BEFORE LIGHTING USE A SOAP AND WATER SOLUTION TO TEST
ALL JOINTS FOR GAS LEAKS.
WARNING