L&W SC-600 ES Operating Instructions Manual Download Page 64

Page: 64 / 146

LW SC-600 ES / LW SC-680 ES / LW SC-750 ES
Version: 01.01.2023

Page A - 62

M A I N T E N A N C E A N D S E R V I C E

Safety valve test

Safety valve test as follows:

• Depressurise the system.

• Turn the adjusting screw of the final pressure switch one

turn clockwise (please see chapter “Final pressure switch“,
page A-47).

• Start the compressor.

• Watch the final pressure gauge. The safety valve should

open when reaching working pressure of the compressor.
If not, switch off the unit and take out of service until the
safety valve has been replaced.

• Switch off the compressor.

• Turn the adjusting screw of the final pressure switch back

(one turn counterclockwise).

• Check the cut-out pressure. Readjust if necessary!

The safety valve test is now completed.

Note

Do not fill any tank during test phase!

Pressure switch

Summary of Contents for SC-600 ES



















































































































































Search results

Summary of Contents for SC-600 ES

Reviews:

Brands by name

Popular brands

L&W SC-600 ES, Operating Instructions Manual

Search results

Summary of Contents for SC-600 ES

Reviews:

Brands by name

Popular brands