L&W SC-600 ES, Operating Instructions Manual

Page: 54 / 146

LW SC-600 ES / LW SC-680 ES / LW SC-750 ES
Version: 01.01.2023 Page A - 52
A
M A I N T E N A N C E A N D S E R V I C E
Filter housing
The mole carbon filter housing is installed on the right hand side
of the compressor housing.
Inside the filter housing a jet blows air on to the housing wall.
Condensation water and oil are led by centrifugal force to the
bottom of the housing. Air flows through the mole carbon filter
cartridge, which purifies the air from residual moisture and
odours.
Filter cartridge
The high-pressure compressor is equipped with an integrated
breathing air purification system. Air is compressed up to 330 bar, dried and odour- and tasteless
purified. Oil residues are bounded. The breathing air filter cartridge consists of a molecular sieve
and activated-carbon filter.
Cartridge capacity: approx. 1.7 l (LW SC-600 ES)
Cartridge capacity: approx. 2.3 l (LW SC-680 ES + LW SC-750 ES)
All breathing air filter cartridges are factory vacuum sealed.
We recommend unpacking the filter cartridges just before installation. Filter cartridges which are
exposed too long could be saturated with moisture and become unusable.
Maintenance intervals
Filter cartridges should be changed at the following intervals, at +20°C or more often, depending
on humidity and ambient temperature:
• 35 hours
Filter housing