L&W SC-600 ES, Operating Instructions Manual

Page: 51 / 146

LW SC-600 ES / LW SC-680 ES / LW SC-750 ES
Version: 01.01.2023 Page A - 49
A
Oil / water separators 1st, 2nd and 3rd stage - maintenance
Maintenance / cleaning of oil / water separators as follows:
• Loosen pipe connections and mounting screws.
• Remove oil / water separators.
• Unscrew and remove filter top (Fig. 1).
• Open nut and remove separator top (Fig. 2).
• Change sinter filter (Fig. 3).
• Reassemble all parts and tighten nut.
• Change o-ring, previously grease new o-ring (Fig. 4).
• Place separator top and tighten manually.
• Remove bottom part (Fig. 5)
• Change o-ring, previously grease new o-ring
• Press in bottom part
• Mount oil / water separators.
• Tighten pipe connections and mounting screws.
The oil / water separator maintenance is now completed.
Fig. 1 - Unscrew and remove filter
top
M A I N T E N A N C E A N D S E R V I C E
Fig. 3 - Change sinter filter Fig. 5 - Bottom part Fig. 4 - Change o-ring
Note
Clean all parts thoroughly before assembly.
i
Fig. 2 - Loosen nut at the separator
top