Landoll Brilllion Till'N Seed BPSB-8, Operator'S Manual

Page: 28 / 76

2-10 F-1097-2305
ASSEMBLY
TABLE OF CONTENTS
Dual Wheel Kit - Optional
WARNING
NOTE
The Tire and Wheel Assembly is mounted with the valve
stem facing outward from the Hub and Spindle Assembly.
IMPORTANT
Torque will drop after the first 10 hours of operation.
Check the Wheel Bolts for proper torque after this
interval and re-tighten them.
Additional Tire and Wheel Assemblies can be added to
the Rockshaft Wheel Arms. Tires are 9.5L-15, 8 Ply
Rating and should be inflated to 44 PSI.
1. Lower the Till 'N Seed.
2. Apply Anti-Seize to the end of the Spindle.
3. Install a Hub and Spindle Assembly into each
Rockshaft Wheel Arm Sleeve. Secure with 3/8-16 x 3
Bolt and Locknut.
See Figure 2-13.
4. Install a Tire and Wheel Assembly onto each Hub with
1/2-20 x 1 Wheel Bolts. Tighten Wheel Bolts to 50
Ft-Lbs using the Sequence in
Figure 2-4. Then
tighten to a full torque of 80-85 Ft-Lbs.
Figure 2-13: Dual Wheel Assembly
Use a torque wrench to assure proper torque.
Insufficient torque can cause stud breakage and
damage the wheel pilots. Over torque can stress
the Bolts and strip the threads.
Wheel Bolts,
1/2-20 x 1
Hub and Spindle
Assembly
Bolt,
3/8-16 x 3
Locknut,3/8
Tire and Wheel Assemblies