Landoll Brilllion Till'N Seed BPSB-8, Operator'S Manual

Page: 68 / 76

4-16 F-1097-2305
MAINTENANCE
TABLE OF CONTENTS
Agitator Box Slide
Adjustment
When the Agitator Box Slide is properly adjusted, the
following should occur.
•
When the Pointer is set to “0” (closed), the Agitator
Box bottom opening end edge is aligned with the
Slide opening end edge.
See Figure 4-22.
Figure 4-22: Pointer Set at “0”
• When the Pointer is set to “6” (open), the Agitator Box
bottom opening end edges are aligned with the Slide
opening end edges. Agitator Box bottom opening is
completely visible.
See Figure 4-23.
Figure 4-23: Shifter Handle Set at “6”
Adjusting the Agitator Box Slide
1. Turn the Adjusting Screw Handle until the Slide
opening edge is aligned with the Agitator Box bottom
opening edge. The Agitator Box opening should be
completely closed.
See Figure 4-24.
2. The Pointer should be at “0” and the opening in the
bottom of the Agitator Box should be completely
closed. If not, loosen the hardware that attaches the
Indicator Mount to the Agitator Box. Move the
Indicator Mount slightly until the Pointer reads “0” on
the Indicator Mount.
Figure 4-24: Agitator Box Completely Closed.
3. Re-tighten the Indicator Mount Hardware.
4. Check that the Adjusting Screw and Pointer functions
properly in relationship with the Indicator Plate.
• Turn the Adjusting Screw Handle until the Pointer
indicates “0”. The Agitator Box bottom opening
should be fully closed.
See Figure 4-24.
• Turn the Adjusting Screw Handle until the Pointer
indicates “6”. The Agitator Box bottom opening
should be completely open.
See Figure 4-25.
Figure 4-25: Agitator Box Completely Open.
5. Set the Pointer to “0”.
Agitator Box
Bottom Opening
Slide Opening
Opening end edge aligned
Agitator Box
Bottom Opening
Slide Opening
Opening end edges aligned
Pointer
Indicator
Mount
Adjusting
Screw Handle
Indicator Mount
Hardware
Slide
Agitator
Box
Agitator Box bottom
opening completely
closed. Box and Slide
opening end edges aligned
Pointer
Indicator
Mount
Adjusting
Screw Handle
Indicator Mount
Hardware
Slide
Agitator
Box
Agitator Box bottom
opening completely open.
Box and Slide opening end
edges aligned