ASSEMBLY
F-1097-2305
2-3
Drawbar Installation
WARNING
When shipped, the Till 'N Seed comes assembled except
for the Drawbar, Lift Rockshaft Assembly, and Tire and
Wheel Assemblies
1. Untie the two rolled up Drawbar Hydraulic Hoses near
the center of the Frame Tube. Ensure the hoses are
not interfering with where the Drawbar is to be
attached.
2. Center Drawbar on the front Frame Tube. Attach
Drawbar to Frame Tube with 3/4-10 U-Bolts, Flat
Washers and Locknuts.
3. Attach the Hose Support to the Drawbar with 5/8-11 x
2-1/4 Bolt, Thick Washer and Flanged Locknut.
4. Lower Drawbar Jack.
Figure 2-2: Drawbar Installation
Do not attempt to lift heavy parts manually. Use a
hoist or a fork lift to move these parts into
position.
Locknut,
Flange 5/8-11
Thick Washer,5/8
Bolt,5/8-11 x 2-1/4
Hose Support
Drawbar
Assembly
Flat Washer,3/4
Locknut,
3/4-10
U-Bolt,
3/4-10
Frame
Parking
Stand
Summary of Contents for Brilllion Till'N Seed BPSB-8
Page 4: ......
Page 18: ...1 12 F 1097 2305 SAFETY INFORMATION TABLE OF CONTENTS Table provided for general use NOTES...
Page 32: ...2 14 F 1097 2305 ASSEMBLY TABLE OF CONTENTS Table provided for general use NOTES...
Page 72: ...4 20 F 1097 2305 MAINTENANCE TABLE OF CONTENTS Table provided for general use NOTES...
