10
LANDMANN
A. Chimney cover
1
B. Chimney
1
C. Thermometer
1
D. Lid for large chamber
1
E. Shelf bracket
2
F.
Shelf board
3
G. Wheel support arch
2
H. Wheel axle
1
I.
Wheel
2
J.
Support cap
2
K. Wire tray
1
L. Stand support arch
2
M. Support brace
2
N. Ventilation flap
1
O. Small chamber
1
P.
Lid for small chamber
1
Q. Handle for chamber
3
R. Large chamber
1
S. Hinge
4
T. Charcoal grid
2
U. Barbecue grid
2
List of parts
Fixing elements
Assembly
1. Stand the large chamber (R) with the small
opening for the chimney on the ground.
2. Join the support arches (G/L) together at the
short ends and hook the wire tray (K) into the
holes provided in the support arches (G/L)
3. Bolt the assembled support arches (G/L) to the
large chamber (R) using M6x45 bolts and M6
nuts so that the holes for the wheel axle (H) are
on the ground.
4. Now attach the support braces (M) to the support
arches (G/L) on each side with M6x45 bolts and
M6 nuts.
5. Turn the chamber (R) upside down and push the
wheel axles (H) through the holes in the wheel
support arches (G). Push the wheels (I) over the
ends of the wheel axle (H) and fix them with two
split pins.
6. Turn the bbq correct way up again so that the
large opening points upwards. Position the small
chamber (O) on the opening and bolt them both
together using M6x12 bolts and M6 nuts.
7. Attach the ventilation flap (N) to the small
chamber using M6 x 12 and lock nut.
8. The next step is to attach the shelf brackets (E)
to the large chamber(R) with M6x12 bolts and
M6 nuts. Bolt the shelf boards (F) to the shelf
brackets (E) with M5x25 bolts and M5 nuts
9. Release the nuts from the bolts on the chimney
(B) and insert them through the holes provided
on the right-hand side of the large chamber (R).
M6x45
12x
M5x25
6x
M6x58
6x
M6x12
1x
M6x12
8x
M5x12
16x
4x
M6
1x
M5
22x
M6
28x
2x
6x
