56/143
Issue 1.2
Installation and Commissioning
© Gyr
D000058620 en a
– E470 Series 3 SMETS2 100 mm – ZCX310 – User Manual and Functional Description
6.5.4.5
Supplier Contact Details Check
Note that the following sequence does not include any dialogues
associated with entering the Privacy PIN on the meter as it is assumed that
the privacy pin will not have been set immediately following device
installation and commissioning. The all test display has also been omitted
although it may be shown depending on the status of the display and
previous button presses.
Step
number
Step entry
action
Step Description
Display
1
Total Active
Import
The normal default display of Total
Active Import should be displayed
on the meter.
R a t e X X A c t I m p
0 0 0 0 0
import
kWh
2
Navigate to
the Credit
Mode Status
display
Press button A briefly (< 2 s). To
access the credit mode status
display (example shown).
C r e d i t M o d e B a l
£ 0 . 0 0
import
import
3
Access rolling
register
display list
From the status display Press and
hold Button A (for >2 seconds) to
access the rolling register display
list. Then press button A several
times to navigate to the Supplier
Contact Details Display The
installation agent can check that
the correct supplier details have
been configured on the meter
during the installation process
S u p p l i e r A x x x x x x x
NB: A change request is being raised that will move the Supplier Contact
Details display to the main credit display sequence, immediately after the
Active Tariff and Active energy import (+A) Total displays. This document
must be updated on delivery of the change to reflect the new position.
