Installation and Commissioning
Issue 1.2
55/143
D000058620 en a
– E470 Series 3 SMETS2 100 mm – ZCX310 – User Manual and Functional Description
© Gyr
2
Navigate to
Credit Mode
Status Display
Press button A briefly (< 2 s). To
access the credit mode status
display (example shown).
C r e d i t M o d e B a l
£ 0 . 0 0
import
import
3
Navigate to
Active Tariff
Price
From the default Rolling Register
Display Screen (credit display
shown) Press Button A (for <2
seconds) several times until the
Active Tariff Price is displayed.
The Active Tariff Price display will
show the pence per unit rate for
the current active tariff. In the
case of a single rate tariff there will
only be one tariff. For a multi-rate
tariff, the display will default to the
rate that is applicable at that time
i.e. the day rate will be shown
during the daylight hours and the
night rate during the night hours.
The installation engineer can use
this function to check that a tariff
and prices has successfully been
applied
A c t v T a r i f f P r i c e
£ 0 . 0 0
import
import
6.5.4.4
MPAN Check
Note that the following sequence does not include any dialogues
associated with entering the Privacy PIN on the meter as it is assumed that
the privacy pin will not have been set immediately following device
installation and commissioning. The all test display has also been omitted
although it may be shown depending on the status of the display and
previous button presses.
Step
number
Step entry
action
Step Description
Display
1
Total Active
Import
The normal default display of Total
Active Import should be displayed
on the meter.
R a t e X X A c t I m p
0 0 0 0 0
import
kWh
2
Navigate to
the Credit
Mode Status
display
Press button A briefly (< 2 s). To
access the credit mode status
display (example shown).
C r e d i t M o d e B a l
£ 0 . 0 0
import
import
3
Access rolling
register
display list
From the status display press and
hold Button A (for >2 seconds) to
access the rolling register display
list. Then press button A several
times to navigate to the MPAN
Display The installation agent can
check that the correct MPAN has
been configured on the meter
during the installation process
M P A N
