Landis & Gyr E350 Series 2 User Manual Download Page 49

Page: 49 / 52

Decommissioning and Disposal

49/52

D000030875 en q

– E350 series 2, 1-phase ZCF100Ax/Cx – User Manual

Decommissioning and Disposal

This section explains the disconnection of the meter from the system and
its correct disposal.

8.1

Decommissioning

The procedure for disconnecting and removing the meter from the mains is
described in section 4.5.

8.2

Disposal

Based on the data specified in environmental certificate ISO 14001, the
components used in meters are largely separable and can therefore be
taken to the relevant disposal or recycling point.



Disposal and environmental protection regulations

For the disposal of meters observe the local disposal and environmental
protection regulations in effect without fail

Components

Disposal

Printed circuit boards

Electronic waste: disposal according to local regulations.

Metal parts

Sorted and taken to collective materials disposal point.

Plastic components

Sorted and taken to recycling (regranulation) plant or if
no other possibility to refuse incineration.

Summary of Contents for E350 Series 2





















































Search results

Summary of Contents for E350 Series 2

Reviews:

Related manuals for E350 Series 2

Brands by name

Popular brands

Landis & Gyr E350 Series 2, User Manual

Search results

Summary of Contents for E350 Series 2

Reviews:

Related manuals for E350 Series 2

Brands by name

Popular brands