![background image](http://html1.mh-extra.com/html/land-pride/fc10/fc10_operators-manual_3522833013.webp)
Section 1: Assembly & Set-up
FC10 C-Tine Field Cultivator 335-043M
1/14/19
9
Unhook Field Cultivator
DANGER
!
To avoid serious injury or death:
Always secure equipment with solid, non-concrete supports
before working under it. Never go under equipment supported
by concrete blocks or hydraulics. Concrete can break,
hydraulic lines can burst, and/or hydraulic controls can be
actuated even when power to hydraulics is off.
1.
cultivator for long periods or at the end of the season.
2. Park tractor with cultivator on a flat, level, solid
surface.
3. Lower cultivator down until cultivator blades are on
the ground.
4. If unhooking from a Quick Hitch, follow instructions in
the Quick Hitch Operator’s Manual. Otherwise,
continue with step 5.
5. Shut tractor down according to
3-Point Hook-up & Unhook Field Cultivator
Figure 1-2
37298
39562
6. Remove hairpin cotter (#3) and clevis pin (#4).
7.
Store top center 3-point link in tractor holder.
8. Reinstall clevis pin (#4) and hairpin cotter (#3) in
upper clevis hitch for safe keeping.
9. Remove linchpins (#1).
10. Move tractor lower 3-point arms off of the cultivator’s
lower 3-point hitch pins (#2). Return linchpins (#1) to
hitch pins (#2) for safe keeping.
11. Return to the tractor and drive slowly away making
sure tractor and lower 3-point arms are clear while
pulling away.