background image

Introduction 

FC10 C-Tine Field Cultivator 335-043M

1/14/19

5

Table of Contents

Land Pride welcomes you to the growing family of new 
product owners. This C-Tine Field Cultivator has been 
designed with care and built by skilled workers using 
quality materials. Proper assembly, maintenance, and 
safe operating practices will help you get years of 
satisfactory use from this cultivator. 

Application

The FC10 Field Cultivator is designed and built by Land 
Pride to perform ripping, loosening, and renovation or 
reshaping of the soil surface, and to prepare a seedbed 
for planting. This cultivator offers 60" working width and is 
adapted for Category 1 3-point hitch mount to tractors 
with a maximum 45 horsepower rating. The 3-point hitch 
is Quick Hitch adaptable.

The Land Pride FC10 Cultivator has applications in 
homeowner landscaping, smaller nurseries, gardens, 
small hobby farms, and wild game food plots.

See 

“Specifications & Capacities” 

on page 15 and 

“Features & Benefits”

 on page 16 for additional 

information and performance enhancing options.

Using This Manual

This Operator’s Manual is designed to help familiarize 
the operator with safety, assembly, operation, 
adjustments, troubleshooting, and maintenance. Read 
this manual and follow the recommendations to help 
ensure safe and efficient operation.

The information contained within this manual was 
current at the time of printing. Some parts may change 
slightly to assure you of the best performance.

To order a new Operator’s or Parts Manual, contact 
your authorized dealer. Manuals can also be 
downloaded, free-of-charge, from our website at 
www.landpride.com

Terminology

“Right” or “Left” as used in this manual is determined by 
facing forward in the direction the machine will operate 
while in use unless otherwise stated.

Definitions

Owner Assistance

The dealer should complete the Online Warranty 
Registration at the time of purchase. This information is 
necessary to provide you with quality customer service.

The parts on your C-Tine Field Cultivator have been 
specially designed by Land Pride and should only be 
replaced with genuine Land Pride parts. Contact a Land 

IMPORTANT: 

A special point of information related 

to the following topic. Land Pride’s intention is this 
information must be read & noted before continuing. 

NOTE:  

A special point of information that the 

operator should be aware of before continuing. 

Pride dealer if customer service or repair parts are 
required. Your Land Pride dealer has trained personnel, 
repair parts, and equipment needed to service the 
implement.

Serial Number

For quick reference and prompt service, record model 
and serial number on the inside cover page and again on 
the warranty page. Always provide model number and 
serial number when ordering parts and in all 
correspondences with your Land Pride dealer. For 
location of your serial number plate, seeFigure 1.

Serial Number Plate Location

Figure 1

Further Assistance

Your dealer wants you to be satisfied with your new C-
Tine Field Cultivator. If for any reason you do not 
understand any part of this manual or are not satisfied 
with the service received, the following actions are 
suggested: 

1.

Discuss any problems you have with your implement 
with your dealership service personnel so they can 
address the problem.

2. If you are still not satisfied, seek out the owner or 

general manager of the dealership, explain the 
problem, and request assistance.

3. For further assistance write to:

Land Pride Service Department

1525 East North Street

P.O. Box 5060

Salina, Ks. 67402-5060

E-mail address

[email protected]

39560

Introduction

Summary of Contents for FC10

























Reviews: