8
Introduction
RCR3596, RCRM3596, RCR3510 & RCRM3510 Rotary Cutters 312-517M
8/15/12
Table of Contents
Introduction
Owner Assistance
The Online Warranty Registration or Warranty
Registration card should be completed by the dealer at
the time of purchase. This information is necessary to
provide you with quality customer service.
The parts on your Rotary Cutter have been specially
designed by Land Pride and should only be replaced with
genuine Land Pride parts. Contact a Land Pride dealer if
customer service or repair parts are required. Your Land
Pride dealer has trained personnel, repair parts, and
equipment needed to service the implement.
Serial Number
Model No. _____________Serial No. _______________
For quick reference and prompt service, record model
number and serial number in the spaces provided above
and again on warranty page 43. Always provide model
number and serial number when ordering parts and in all
correspondences with your Land Pride dealer. Refer to
Figure 1 for location of your serial number plate.
Serial Number Plate Location
Figure 1
Further Assistance
Your dealer wants you to be satisfied with your new
Cutter. If for any reason you do not understand any part
of this manual or are not satisfied with the service
received, the following actions are suggested:
1.
Discuss the matter with your dealership service
manager making sure he is aware of any problems
you may have and that he has had the opportunity to
assist you.
2.
If you are still not satisfied, seek out the owner or
general manager of the dealership, explain the
problem and request assistance.
3.
For further assistance write to:
Land Pride Service Department
1525 East North Street
P.O. Box 5060
Salina, Ks. 67402-5060
E-mail address
IMPORTANT: A special point of information related
to the following topic. Land Pride’s intention is this
information must be read & noted before continuing.
16000
Land Pride welcomes you to the growing family of new
product owners.
This Cutter has been designed with care and built by
skilled workers using quality materials. Proper assembly,
maintenance, and safe operating practices will help you
get years of satisfactory use from the machine.
Application
The medium duty RCR(M)3596 and RCR(M)3510 Series
Rotary Cutters are designed and built by Land Pride to
provide excellent cutting performance on gently sloping
or slightly contoured right-of ways, pastures, set-aside-
acres, or row crop fields. Their eight or ten foot cutting
width, 2" to 12" cutting height and ability to cut weeds and
brush up to 2" in diameter make them well suited for
these applications.
Both models offer Quick-Hitch adaptability with either
540rpm or 1000rpm PTO capability. The RCR3596
Cutter Series is designed for category 1 or 2, three point,
semi-mount, or pull type attachment. Three-point
attachment for the RCR3596 requires a 50-120 hp
tractor, while the semi-mount or pull-type requires a 30-
120 hp tractor. The RCR3510 Series is designed for
category 2 or 3 three point, semi-mount, or pull type
attachment with the lift type requiring 60 hp - 120 hp input
and the pull type or semi-mount requiring 50 hp - 120 hp
input.
Heavy-duty stump jumpers, main driveline clutches, and
outboard flex couplers are offered for driveline and
gearbox protection. Safety guards around the cutter are
offered in either chain or rubber.
See “Specifications & Capacities” on page 38 and
“Features & Benefits” on page 39 for additional
information and performance enhancing options.
Using This Manual
•
This Operator’s Manual is designed to help familiarize
you with safety, assembly, operation, adjustments,
troubleshooting, and maintenance. Read this manual
and follow the recommendations to help ensure safe
and efficient operation.
•
The information contained within this manual was
current at the time of printing. Some parts may change
slightly to assure you of the best performance.
•
To order a new Operator’s or Parts Manual contact
your authorized dealer. Manuals can also be
downloaded, free-of-charge from our website at
www.landpride.com.
Terminology
“Right” or “Left” as used in this manual is determined by
facing the direction the machine will operate while in use
unless otherwise stated.
Definitions
NOTE: A special point of information that the
operator should be aware of before continuing.
