Land Pride 312-517M, Operator'S Manual

Page: 41 / 46

39
Section 6: Features & Benefits
8/15/12 RCR3596, RCRM3596, RCR3510 & RCRM3510 Rotary Cutters 312-517M
Table of Contents
Section 6: Features & Benefits
RCR3596, RCRM3596, RCR3510 & RCRM3510 Models
Features Benefits
Surpassed rugged
industry standards All Land Pride Cutters have been designed and tested and meet rigorous voluntary testing
procedures specified by ANSI.
540 or 1000 RPM Fits wider variety of tractors.
Gearbox HP rating 120 HP on center unit and 100 HP on outboard units.
5 Yr. limited gearbox warranty Shows our confidence in the gearbox integrity.
3 Gearboxes Allows equal torque to be spread to left and right gearbox.
Splined rubber flex-couplers
between the center and
outboard gearboxes Protects the driveline and gearboxes from hard objects in the blade path.
Pull-type unit
Constant velocity driveline
U-Joint option (RCR3510 only) Reduces chatter and extends life of U-joint during turns.
Slip-clutch protection
on main driveline Slip-clutch is more convenient than shear-bolt, protects gearbox against sudden impact.
8’- Cat. 1 & 2 or 10’- Cat. 2 & 3
3-Point & Semi-mount Hitches
or Pull-type Hitch Fits a wide range of tractors.
Semi-mount and Pull-type fit older tractors without a top link and smaller tractors without
enough lift capacity.
10 Gauge deck, fully welded Fully welded deck adds rigidity.
1/4" Thick sidewalls Protects sidewalls from thrown objects.
Obstacle free underside Underside of deck is free of reinforcement members which tend to allow material to lodge.
Round back design Allows for cleaner and efficient discharge of material, helps eliminate damage to rear
corners by not sticking out.
Pull-type w/dual leveling rods Dual leveling rods eliminate deck twisting when going over uneven terrain.
Chain or rubber guard option Reduces flying debris.
Full length skids
with replaceable shoes Adds reinforcement to side panels. Replaceable shoes allow for change before wearing
through to weld-on piece.
Splined blade hub Splined blade hub offers tight non-slipping attachment to output shaft.
3/16" Round stump jumper Standard stump jumper aids in sliding over obstructions, which helps protect gearbox
output shaft.
1" x 4" Blade bar Heavy-duty blade bar adds support to stump jumper as well as gearbox output shaft.
1/2" x 4" Heat-treated blades Heat-treated blades last longer than non-heat-treated blades.
2" Diameter cutting capacity Aids in cutting brush.
High blade tip speed Means cleaner cutting.96" at 540 rpm - 14,223 fpm; at 1000 rpm - 14,442 fpm
10’ at 540 rpm - 17,291 fpm; at 1000 rpm - 17,569 fpm
Laminated tires on 3-Point
and Semi-Mount Laminated tires can handle almost any condition.
Airplane tires or
Laminated tires on Pull-Type Airplane tires offer smooth roadability. Laminated tires don’t go flat.
Quick-Hitch adaptable 3-point and semi-mount are Quick-hitch adaptable.
Paint Options Choice of red, green, or tan to match popular tractor lines.