lancer 810 LX, User Manual

Page: 20 / 68

CHAPTER 2
BEFORE YOU START
NU_810-815_LX_ANG_1306
20
5.7
NOTE PRINTING
If the printer is connected to a battery pack and not an AC battery charger, it is imperative to
control the operating mode (sleep mode / idle mode) of your printer prior to launch the printing.
In the user menu, you can access to the reprinting cycles tickets and in the supervisor menu for
printing:

program parameters

configuration settings.
If the printer is in sleep mode, the data launched from these menus will be lost.
It is imperative to enable the printer by pressing the paper feed button to launch printing.
If printing has been requested without idle mode setting of the printer, it may be necessary to
power off and on again your washer and printer to reset them.
Do not hesitate to consult GETINGE LANCER for advice.