background image

CHAPTER 3   
WASHING CYCLE LAUNCHING 

 

NU_810-815_LX_ANG_1306 

29

 

 

2.3 LAUNCHING THE CYCLE 

 

After choosing the washing cycle number, 

push on 

 button and one of the following screens will be displayed : 

 
a) the display indicates : 
- the selected cycle number, 
- the temperature in the chamber, 
- the current function : "

PREWASH 

1". 

 

0 4      C Y C L E

  S T A R T

 

 E M P T Y

I N G

 S T A R T

 

 
The cycle will be carried out without requiring any further action. 
 
b) If the chemical container(s) are empty, the display indicates : 
 

 

 

 

 

  W A R N

I  N G

 

 

 

 

 L A C K  O F

 C H E M I C

 
It is necessary to fill or change the detergent or acid container to start the cycle.  
 
c) If there is water in the basin following the interruption of the previous cycle or due to 
abnormal addition of water, the display indicates : 

 

 

 

 

 

  W A R N

I  N G

 

 

 

 

   F 

L L

 B A S

I N

   

 

The washer will empty automatically and the cycle then proceeds normally. 
 
d) If the temperature probe is defective, the display indicates : 
 

  F 

L T

  N °

0 1

   

  P 

B E

 D E F E C T

  

 
The probe must be replaced prior to operation of the machine. 
 
 

 

AT THE END OF THE CYCLE, LET COOL THE SUPPORTS, 
BASKETS, ACCESORIES AND WASHED OBJECTS BEFORE 
HANDLING THEM. 

 

Summary of Contents for 810 LX





































































Reviews: