CHAPTER 5
MAINTENANCE OF THE WASHER
NU_810-815_LX_ANG_1306
57
3.
EXTERNAL MAINTENANCE OF THE WASHER
GETINGE LANCER washers are entirely covered with panels (bodywork) in stainless steel AISI
304L.
3.1 CLEANING METHOD
The periodic maintenance cleaning must be done with a cleaning product.
Should the periodic maintenance have been largely forgotten, we recommend the use of a specific
cleaning product.
The product must be applied with the help of a rag or a soft sponge, and always polishing the
stainless steel in the sense of the brushing to avoid the risk of stripes.
For the drying, the best is using a rubber scraper similar to the one used to clean windows. This
will avoid watering you can have with a rap cleaning.
PRUDENCE:
TRY TO AVOID THE PROJECTIONS OF LIQUID OVER THE
WASHER.
3.2 CLEANING PRODUCTS
GETINGE LANCER offers a maintenance product for stainless steel in the market under the name
of LANCERSHINE.
A safe and efficient aerosol cleaning product for a use in the external side of the stainless
machines and other equipments to be washed, assuring a very professional finishing.
Available in container of 450 ml. Ref: LANCERSHINE
DETERGENTS, SOAPS:
All the detergents, soaps or cleaning products found in shops can normally be used, but they
MUST NOT contain chlorinated products. Domestic soaps for dishwashers or washing machines
are particularly adapted to the periodical cleaning.
ABRASIVE DUSTS:
These products can stripe the stainless steel surfaces and modify then the aspect, at least locally.
Even that, their use can be useful to eliminate by scraping the adherent spots.
ACID PRODUCTS:
The resource to these acid-cleaning products must only be used in specific cases.
Vinegar (acetic acid) can be used to remove stains left by minerals.
There are phosphoric acid-based or nitric acid-based products specially conceived for the
cleaning of stainless steels. It is convenient to follow strictly the instructions given by theirs
manufacturers.
The chloric disinfectants must only be used with caution: diluted solution in cold water, short
contact time, abundant rinsing.
IN ALL THE CASES IT IS NECESSARY TO PROCEDE AFTER THE
CLEANING TO AN ABONDANT AND CAREFUL RINSING (WITH A
SOFT TEXTILE), IN ORDER TO ELIMINATE EVERY TRACE OF
THE USED PRODUCT.
Summary of Contents for 810 LX
