Lanberg © 2015-2020
21
EN
2.2.4. Front door frame installation
1. Align the front frame
[H]
on the top of the cabinet with the side
frames
[J + K]
.
Before you go any further make sure to check whether the
assembly is progressing correctly. Remember to place the
front door frame so that:
I) The brand logo is located above the highest numbering on
the vertical mounting rails.
II) The brand logo was located above the holes for wall
mounting of the back of the cabinet.
2.2.3. Top and bottom cover installation
1. Remove both covers
[I]
from the bubble wrap. Then insert them at both ends of the cabinet structure
[L]
so that the cable entry is
at the bottom.
Remember to insert the hooks located on the upper ends of the left and right sides of the covers into the holes on the upper
side frames
[J + K]
. By doing this, both covers will be fixed.
2. Fix the front door frame with 4 (< 21 U) or 6 (>= 21 U) M6*12 Phillips screws
[A]
, by screwing them from top to bottom.
