Lanberg WFFA 54 Series User Manual Download Page 14

Page: 14 / 34

1. Important introductory recommendations and usage information of 19” fast assembly wall-mount cabinets

1.1 Introduction

PLEASE SAVE THIS MANUAL - it contains a set of recommendations, guidelines, safety rules, restrictions and operating instructions of
Lanberg’s 19” fast assembly wall-mount cabinets, detailing the models supported below:

Manual also contains logistic and technical data, instructions and regulations that must be observed and complied with during
transport, assembly, use and potential maintenance of the products. Under no circumstances should you use the device before carefully
reading and fully adapting to all information in the user’s manual. Keep this manual for future reference. All photos, illustrations

or keeping the current information in this manual, nor for notifying its users or organization about the updates. In particular, Lanberg
owners are not responsible for any equipment, software or data stored/used with the product, including maintenance, replacement,
integration, installation or recovery of hardware, software or data in the event of misuse of the product or its components.

Lanberg brand owners reserve the right to make changes to this manual at any time without notice. The products mentioned in this
manual, including the documentation, are the property of the Lanberg brand owners and its licensors. Any use or reproduction of
these products, including documentation, is prohibited, except as expressly authorized under the appropriate license terms.

NOTE

: For the most up-to-date version of this manual, please visit our website at www.lanberg.eu.

1.2 Compliance with legal and regulatory provisions regarding safety and the environment

This product complies with EU safety and environmental regulations.
The products listed in the following instructions have been approved for trading within the EU, by obtaining a European Union
Declaration of Conformity, which contains a declaration with the essential requirements and other relevant provisions of the following
Directives, and that the following harmonized standards have been applied.

Directive: RoHS 2011/65/UE + 2015/863/UE

Standards: IEC 62321-4:2013 + A1:2017; IEC 62321-5:2013; IEC 62321-6:2015; IEC 62321-7-1:2015; IEC 62321-7-2:2017; IEC
62321-8:2017;

With the development of products and updates to CE regulations, the declaration may change. The latest declaration
of conformity (CE) can be found at: www.lanberg.eu.

NOTE: The use of the WEEE symbol (crossed out wheelie bin symbol) means that this product cannot be treated as household waste.
Proper  disposal  of  used  equipment  avoids  risks  to  human  health  and  the  environment,  resulting  from  the  possible  presence  of
hazardous substances, mixtures and components in the equipment, as well as, improper storage and processing of such equipment.
Selective  collection  also  allows  you  to  recover  materials  and  components,  from  which  the  device  was  manufactured.  For  more
information  about  the  recycling  of  this  product,  please  contact  the  retail  outlet,  where  the  product  was  purchased,  or  request
information from the local authority.

1.3 Packaging contents

The following items should be provided in the shipping packaging:

(1x) Front frame with lockable glass door. Both elements equipped with grounding pins.

(2x) Top / Bottom cover with break-out cable entry and 2 holes in the center for 12x12 cm fans.

String bag with mounting accessories: (8x @ < 21 U; 12x @ >= 21 U) M6*12 Phillips screws; (12x) M5*10 Self-tapping screws; (10x @ < 13 U;

20x @ >= 13 U) M6*12 Phillips screws with M6 Cage nut; (1x) level with magnet; (3x) keychain with double keys.

(1x) User’s manual; (1x) wall-mount rail.

(2x) Side frame of the cabinet with removable door, equipped with 2 latches (except 4U) and grounding pin.

(1x) Rear cabinet cover.

(4x) Numbered vertical mounting rails to install devices compatible with RA CK standard.

WFFA-5409-10B

WFFA-5409-10S