Lanberg © 2015-2020
16
EN
1.9 Storage and ventilation
• The product should be installed only in locations with limited access (separate rooms for equipment etc.).
• Do not install and store device in places with water (still or running), humidity or any other liquid substances being present.
• Avoid exposing the device to direct sunlight sources.
• Place the device on a stable, dry surface in a well-ventilated place. Leave at least 100 mm of free space around it to ensure adequate
ventilation.
• The device is designed to work only in a controlled environment (controlled temperature and humidity according to the data in the
specification, indoors, without conductive pollution present [dust, flammable gases, corrosive substances, etc.]).
2. Assembly
Be sure to strictly follow the instructions in this manual.
2.1 Preparations
Prepare the appropriate amount of free space on the surface on which the assembly will take place. Carefully remove all items from the
shipping carton - preferably as shown below. Further assembly instructions will be based on the diagram provided.
Be sure to prepare 4 expansion anchors (not included with cabinet) and 4 screws adapted to the assumed overall total weight of the
cabinet (and equipment inside), as well as to the diameter of the holes on the wall-mount rail, which is: 4 – Ø 10.
i
