9
2
General Safety Instructions
the requirement for enclosure type 3 (NEMA). The device is designed for installation in
switch cabinets.
These operating instructions describe many possible applications and functions and
should be used as guidelines. Carry out functional tests on the test bench and/or in the
plant application to ensure correct functioning and document the results.
Check all safety times during the commissioning.
In order to provide for operating safety, make sure when installing the output contacts that
the circuitry of the radio interference suppression to be provided by the user is carried out
in such a way that there is no risk of shorting out the relay contact output (flame signal) by
defective component parts of the suppressor circuitry.
NOTICE
Follow the additional instructions to guarantee safety and reliability when working with the
F130l:
Prevent effects of condensation and humidity. If necessary, make sure that the installation
is sufficiently dry before you switch it on.
Avoid static charge because This is has a destructive effect when it comes into contact
with the device's electronic components
Ensure that the maximum permitted operating temperature (refer to this in table
), particularly due to radiant heat, is not exceeded at the installation loca-
tion.
Take action to ensure sufficient cooling.
NOTICE
LAMTEC recommends that you use ESD equipment when working on the electrics/electron-
ics!
Summary of Contents for F130I
Page 2: ......
Page 43: ...42 11 Appendix 11 4 Declaration of Conformity...
Page 44: ...43 11 Appendix...
