Lampoassa ELI 60-90, User Manual

Page: 30 / 62

30
100% GEOTHERMAL HEAT
MAINTENANCE
5.4.9. Temperature gauges
This screen allows choosing the temperature gauges used. By default, the
outdoor temperature gauge is present. Indoor temperature gauge is optional.
5.4.10. External alarm
On this page, if in use, external alarm settings are defined. Status is eit-
her info or serious. Is the status is info external alarms doesn´t affect to
the heat pump operation. Is the status is serious compressors are not
starting. External alarm can be connected to digital inputs 17 or 18.
5.4.11. Soft starter alarms
The soft starter alarms can be activated at this page.
5.4.12. Super heat valve control
This menu is for adjusting superheat trim valve settings. Value in the menu
indicates the setting point when compressor is running. Valve position bet-
ween the compressor runs indicates valve settings point when compressor
is not running. Frequency between the flushes is settled with rinse interval.
Rinse is implemented on the first running period of the day when time
indicated in the rinse interval is full. Valve type (NP/NC) is defined with the
diversed controlling. Manual controlling settles the valve to the percentage
indicated in the valve setting point. The factory setting for super heat valve
control can be found from the Technical specifations table.