Lampoassa ELI 60-90, User Manual

Page: 13 / 62

13
USER MANUAL
100% GEOTHERMAL HEAT
Use the button in the bottom left corner to return to the home screen. Use the arrow button in the bottom right corner to return to previous screen. For
instructions screen, press the ‘i’ button in the top right corner. In case of operation faults, an alarm button is displayed on the top bar.
3.5.3. Other set values
The menu Other set values allows circuit-specific programming of maxi-
mum and minimum heat distribution circuit supply water values, as well
as programming of the safety device-heating element activation time.
3.5.3.1. Language
The Language menu allows choosing between Finnish, Swedish and
English for the user interface language.
3.5.3.2. Screen settings
On screen settings -page it is possible to adjust the brightness of the
screen and also the time after the screen goes off.
3.5.3.3. Min and max temperature of HD circuits
Set values are minimum possible values (min) and maximum possible
values (max). Heat distribution circuits 2 and 3 are optional.
Factory settings for heat distribution circuits are as follows:
Set value and
setting range Meaning Factory
setting
Supply water1
max 0…90 °C Maximum value of heat distribution
circuit 1 heating supply water.
60°C
Supply water1
min 0…90 °C Minimum value of heat distribution
circuit 1 heating supply water.
5°C
Supply water2
max 0…90 °C Maximum value of heat distribution
circuit 2 heating supply water.
60°C
Supply water2
min 0…90 °C Minimum value of heat distribution
circuit 2 heating supply water.
5°C
Supply water3
max 0…90 °C Maximum value of heat distribution
circuit 3 heating supply water.
60°C
Supply water3
min 0…90 °C Minimum value of heat distribution
circuit 3 heating supply water.
5°C