Lampoassa ELI 60-90, User Manual

Page: 27 / 62

27
100% GEOTHERMAL HEAT
MAINTENANCE MAINTENANCE
Etusivulle palataan näytön vasemmassa alakulmassa olevasta painikkeesta. Edelliselle sivulle palataan näytön oikeassa alakulmassa olevasta nuolipai-
nikkeesta. Oikean yläkulman i-painikkeesta avautuu ohjesivu. Toimintahäiriössä yläpalkkiin ilmestyy hälytyspainike.
5.4.1. Manual control
This screen allows bypassing automatics and controlling compressors,
pumps, and valves manually. Control has been divided between
digital
outputs and analog outputs .
5.4.2. Input and output statuses
For the purpose and function of digital inputs and outputs, see the
annexed equipment electrical diagrams.
Digital inputs
This screen allows checking digital input statuses.
Digital Input (ID)
1 Compressor 1 Motor protection 10 Low pressure alarm circuit 1
2 Not in use 11 High pressure alarm circuit 1
3 Brine pump 1 Run indicator 12 Compressor 1 Run indicator
4 Not in use 13 Not in use
5 Not in use 14 Soft Starter
6 Not in use 15 External Alarm
7 Compressor 1 internal alarm 16 Not in use
8 Not in use 17 Flow Sensor
9 Phase failure detector 18 Not in use
Digital outputs
This screen allows checking digital output statuses.
Digital Output (NO)
1 Brine circuit 1 10 Not in use
2 Not in use 11 Not in use
3 Alarm signal 12 Immersion heater 4
4 Compressor 1 13 Immersion heater 1
5 Condenser pump 1 14 Heating circuit pump 1
6 Magnetic valve 1 15 Heating circuit pump 2
7 Immersion heater 2 16 Heating circuit pump 3
8 Immersion heater 3 17 Not in use
9 Not in use 18 Pressure equalizing valve
(Only 1-phase devices)
Analog inputs