Lampert optiwelder T1, Operating Instructions Manual

Page: 10 / 15

9
SECTION 8 – REPLACEMENT PARTS LIST
100 150 151 152
Hand piece:
100 100
Complete Hand piece
100 150 Valve
100 151 Spread pliers
100 152 Nut
Electrodes:
284315 Electrodes 10 pcs. In display can
(Thorium dioxide - free)
Soldering Tweezer:
284310 Soldering Tweezer with 900 mm cable
Clamp:
284317 Electric Clamp
Grindinwheel:
284316 Diamandweel
SECTION 9 – EG Conformity Declaration
- According to machine guidelines 98/37/EG, Appendix II A
-
According to low voltage guidelines 73/23/EWG
- According to EMV (electro-magnetic compatibility) guidelines 89/336/EWG
The Manufacturer,
Lampert Werktechnik GmbH............................................................................................................................................
Julius-Echter-Str. 4, 97440 Werneck, Germany,..............................................................................................................
declares that the product
“optiwelder T1” Spot Welding Device
conforms to the conditions set forth in the above-named guidelines, including any changes made up to the time of
declaration.
The following harmonised standards were used:
Welding current sources for arc hand welding in limited operation: DIN VDE 0543 (VDE 0543)
Protective housing type (IP Code): DIN EN 60529 (VDE 0470-1)
Electro-magnetic compatibility (EMV): EN50199
Werneck, September 5th, 2002
Lampert Werktechnik GmbH
Andrea Bauer – Lampert (President and CEO)