4.
Put the door on a soft cloth on a stable
surface.
5.
Release the locking system to remove
the glass panels.
6.
Turn the two fasteners by 90° and
remove them from their seats.
90°
7.
First lift carefully and then remove the
glass panels one by one. Start from the
top panel.
1
2
8.
Clean the glass panels with water and
soap. Dry the glass panels carefully.
When the cleaning is completed, install the
glass panels and the oven door. Do the
above steps in the opposite sequence.
Make sure that you put the glass panels (A,
B and C) back in the correct sequence. The
middle panel (B) has a decorative frame.
The screen-printing zone must face the
inner side of the door. Make sure that after
the installation the surface of the glass
panel frame (B) on the screen-printing
zones is not rough when you touch it.
30
Summary of Contents for LAM3700
Page 1: ...User Manual Single Pyrolytic Oven LAM3700...
Page 36: ...36...
Page 37: ...37...
Page 38: ...38...
