Lamona LAM3700, User Manual

Page: 28 / 39

Notes on cleaning
• Clean the front of the appliance with a
soft cloth with warm water and a
cleaning agent.
• To clean metal surfaces, use a usual
cleaning agent.
• Clean the appliance interior after each
use. Fat accumulation or other food
remains may result in a fire. The risk is
higher for the grill pan.
• Clean stubborn dirt with a special oven
cleaner.
• Clean all accessories after each use and
let them dry. Use a soft cloth with warm
water and a cleaning agent.
• If you have nonstick accessories, do not
clean them using aggressive agents,
sharp-edged objects or a dishwasher. It
can cause damage to the nonstick
coating.
Stainless steel or aluminium
appliances
Clean the oven door with a wet
sponge only. Dry it with a soft
cloth. Do not use steel wool,
acids or abrasive materials as
they can damage the oven
surface. Clean the oven control
panel with the same
precautions.
Removing the shelf supports
To clean the oven, remove the shelf
supports.
1. Pull the front of the shelf support away
from the side wall.
2. Pull the rear end of the shelf support
away from the side wall and remove it.
2
1
Install the shelf supports in the opposite
sequence.
Pyrolysis
CAUTION! Remove all
accessories and removable shelf
supports.
The pyrolytic cleaning
procedure cannot start:
• if you did not fully close the oven door.
Remove the worst dirt manually.
CAUTION!
If there are other
appliances installed in the same
cabinet, do not use them at the
same time as the function:
Pyrolysis. It can cause damage
to the appliance.
1. Clean the inner side of the door with hot
water, so that the residues do not burn
from the hot air.
2.
Activate the appliance and select from
the main menu the function: Pyrolysis.
Press
to confirm.
3. Set the duration of the cleaning
procedure:
28