5
1 Ordering and checking at delivery
1.1 Ordering 16131.5
Id-No. for standard configurations 16131.5:
Version 00.16131.501030:
ISO 9060 first class pyranometer sensor with Modbus over RS-485 and heater
Version 00.16131.501040:
ISO 9060 first class pyranometer sensor with 4 to 20 mA output without heater
Version 00.16131.501000:
ISO 9060 first class pyranometer sensor with passive analogue millivolt output and heater
Common options / accessories are:
•
cable 10 m, M12 plug connector, 5-pin
Id-No. 32.14581.060000
•
cable 15 m, M12 plug connector. 5-pin
Id-No. 32.05005.001500
Suitable data loggers:
•
met[LOG]
Id-No. 00.95800.010000
•
Ser[LOG]
Id-No. 00.95770.000000
1.2 Included items
Arriving at the customer, the delivery should include:
•
pyranometer 16131.5
•
sun screen
•
cable of the length as ordered
•
product certificate matching the instrument serial number, including:
o
calibration certificate
•
any other options as ordered
Please store the certificates in a safe place.
1.3 Quick instrument check
1. At power–ON the signal may have a temporary output level different from zero; an offset. Let
this offset settle down; it is a normal part of the power-ON procedure.
2. Check if the sensor reacts to light: expose the sensor to a strong light source, for instance a
100 W light bulb at 0.1 m distance. The signal should read > 100 W/m
2
now. Darken the
sensor either by putting something over it or switching off the light. The instrument irradiance
output should go down and within one minute approach 0 W/m
2
.
3. Inspect the instrument for any damage.
4. Check the instrument serial number as indicated by the label on the instrument against the
certificates provided with the instrument.
