lamber LP6-ek, Instruction Manual

Page: 37 / 43

37
DRAWBACK POSSIBLE CAUSES AND REMEDIES
If the drawback is not due to any of the
causes listed here above, proceed as follows:
In the case of electrical heating machines
1) check that the coil of remote control
switch MT3 is not broken.
2) check that the safety thermostat did
not trigger.
3) check all elements of boiler heater.
In the case of steam heating machines
1) check that the steam inlet gate is open
and is present at a pressure not less than
0,5 bar (50 kPa).
2) check that the condensed steam
drainage filter is not clogged.
3) check that the steam solenoid valve
operates correctly.
4) check that the inlet steam filter is not
clogged to such an extent as to prevent the
normal flow rate.
5) check that the condensed steam outlet
pipe can freely drain by drop.
6) check that the pipe coil is not scaled to
such an extent as to limit heat exchange
thereof.
The manufacturer declines any responsibility for any printing errors contained in this booklet. The
manufacturer also reserves the right to make any modifications to its products that don't affect the
basic characteristics thereof.