lamber LP6-ek, Instruction Manual

Page: 11 / 43

ENGLISH
First Section - FOR THE USER
WORKING AND USE
The Pot-washing machines can wash up to 30-20-10 baskets every hour.
The machine protection degree is
IP21 , therefore it should not be washed with direct high
pressure jet water;
The objects to be washed should be correctly arranged for a good washing-up result;
We suggest to descale dishes, from time to time, in order to remove calcareous and/or
starchy sediments by soaking it in suitable solutions suggested by your cleansing agent
supplier.
OPERATION BEFORE WORKING
B
EFORE STARTING THE WORKING OPERATION
BE SURE THAT
:
- the wall-mounted on/off switch is
switched on;
- the water and steam* cocks are open;
- the filters and the overflow are in
their housings;
- the wash arm and the rinse arm are
free to pivot;
* for steam machines only
CAUTION : Observe the safety notes and
dosage data for the use of chemicals. During
the use of the chemical substance wear
protective clothing, gloves and protective
glasses. Do not mix different cleaning
products.
T
HEN PROCEED
:
A -
Turn the machine on by wall switch
and push the switch "A" to the ON position
(draw 1).
The green lamp
"C" becomes lighted and
the machine loads automatically.
B -
Lift the inspection doors.
Put the detergent directly into the
tank, by paying
attention to distribute it uniformly on the
filters, the quantity being according to
supplier's instructions.
N.B.
When using chlorinated detergent, it is
suggested to use an automatic dispenser; if
otherwise, brownish spots might appear on
the surfaces, because of chlorine reactions,
if powering the detergent directly in the
tank.
C - Turn the machines on by wall switch and
push the switch
“A ” ( Dis.1.).
At this moment the thermometer display
lights up
And the tank fills up. When the tank is full the
control lamp for cycle “2” lights up.
D – Introduce the basket in the ware-washer.
N.B
.: When the objects to be washed
present burnt crusts, or a long time is
elapsed from cooking up tothe time of
washing, it is necessary to make a previous
softening in water at 50°C, by using an
appropriate softening product.
The control lamp “ E ” will flash in case the
door of the dishwasher is open.
Before you start the cycle be sure that the
control lamp “
D ” is flashing. This means that
the water for the washing cycle and the
rinsing water temperature reached the ideal
temperature for working.
E – Choose the washing period cycle and
push the button “
B ” between the following
items:
- lamp 1 flashing – short cycle of
3 minutes