7
1.
Attach the 3 - M6x35 Screws (BB) to the Connector (H).
(Note: Tighten the screws with the Screwdriver (JJ) provided.)
Hardware Used
:
2.
Align the screws in the bottom of the Connector (H)
with the holes in the top of the Tank Housing (I).
(
Hint
: Make sure you open the door of the Tank
Housing so you will have access to the screws.)
Place the Connector onto the top of the Tank
Housing and then slide 1 – M6 Washer (CC) and
1 – M6 Spring Washer (EE) over the end of the screw.
Secure the Connector to the Tank Housing with
1 – M6 Nut (DD). Repeat with the other 2 screws on
the Connector. Tighten the nuts with the Wrench (HH)
provided.
Hardware Used
:
ASSEMBLY
1
2
Summary of Contents for Fleur-de-lis
Page 3: ...3 SAFETY INFORMATION ...
Page 4: ...4 SAFETY INFORMATION ...