11
8.
Attach the Guard Bar with LPG Tank Strap (J) to
the Tank Housing (I) using 2 – M6x18mm Screws (AA)
and 2 – M6 Washers (CC).
Hardware Used:
9.
Attach Head Assembly (C) to Post (G). Route Gas Hose (D)
down into Post (G) and then align holes in Head Assembly (C)
with holes in top of Post (G) (
Tip
: The control knob should
be directly above the decal on the post).
Insert 4 – M6x12 Screws (FF) through 4 – Spring Washers (EE) and
4 – M6 Washers (CC) then into holes and securely tighten
with the Wrench (HH).
Hardware Used:
ASSEMBLY
8
9
Summary of Contents for Fleur-de-lis
Page 3: ...3 SAFETY INFORMATION ...
Page 4: ...4 SAFETY INFORMATION ...
