10
6c.
Slide Center Cap (B) onto Reflector Panels (A).
Insert 1 – M6x10 Screw (KK). Slide 1 – M6 Washer (PP)
over threaded end of screw and loosely screw on
Cap Nut (LL). Repeat to secure Center Cap onto
Reflector Panels. Then fully tighten all of the screws/nuts
on the rolled edge.
Hardware Used (6a/b/c):
7.
Attach the Reflector to the Head Assembly (C). Slide
3 – M8 Washers over the threaded end of the Double
End Stud (NN). Align the Reflector with the Double End
Studs and then slide 3 – M8 Washers over the end of the
Double End Studs and secure the Reflector to the Head
Assembly using 3 – Wing Nuts (MM). Securely tighten the
Wing Nuts but DO NOT overtighten.
Hardware Used:
ASSEMBLY
6c
7
Summary of Contents for Fleur-de-lis
Page 3: ...3 SAFETY INFORMATION ...
Page 4: ...4 SAFETY INFORMATION ...
