Lakeshore 336, User Manual

Page: 159 / 192

7.1 General 147
|
www.lakeshore.com
Chapter 7: Options and
Accessories
7.1 General
This chapter provides information on the models, options, and accessories available
for the Model 336 temperature controller.
7.2 Models
The list of Model 336 model numbers is provided as follows:
Power configurations—the instrument is configured at the factory for customer-
selected power as follows:
7.3 Options
The list of Model 336 options is provided as follows:
7.4 Accessories
Accessories are devices that perform a secondary duty as an aid or refinement to the
primary unit. Refer to the Lake Shore Temperature Measurement and Control Catalog
for details. A list of accessories available for the Model 336 is as follows:
Model Description of Models
336 Standard temperature controller. 4 diode/RTD inputs and 4 control outputs
TABLE 7-1 Model description
1 100 V-US (NEMA 5-15)
2 120 V-US (NEMA 5-15)
3 220 V-EU (CEE 7/7)
4 240 V-EU (CEE 7/7)
5 240 V-UK (BS 1363)
6 240 V-Swiss (SEV 1011)
7 220 V-China (GB 1002)
TABLE 7-2 Power configurations
Model Description of Options
3060 Dual Thermocouple Input Option Card. Adds 2 thermocouple inputs to the Model 336.
3061 Capacitance Input Option Card. Adds one capacitive sensor input to the Model 336.
3062 Diode/RTD Expansion Input Option Card. Adds 4 scanner diode/RTD inputs to the Model 336.
TABLE 7-3 Model description
Model Description of Accessories
106-009* † Heater Output Connector. Dual banana jack for heater output.
G-106-233* † Sensor Input Mating Connector. 6-pin DIN plug for diode/resistor input; 4 included
G-106-755* † Terminal Block Mating Connector. 10-pin terminal block for relays and Outputs 3 and 4.
115-006* † Detachable 120 VAC Line Cord.
MAN-336* † Model 336 Temperature Controller User's Manual.
112-177
Sensor/Heater Cable Assembly—10 Feet. Cable assembly for 2 diode/resistor sensors and
1 heater output. Approximately 3 m (10 ft) long. Requires 2 to use 4 sensors and 2 heaters.
Refer to FIGURE 7-1.
112-178
Sensor/Heater Cable Assembly —20 Feet. Cable assembly for 2 diode/resistor sensors and 1
heater output. Approximately 6 m (20 ft) long. Requires 2 to use 4 sensors and 2 heaters.
Refer to FIGURE 7-1.
112-180
Sensor/Heater Cable Assembly —33 Feet. Cable assembly for 2 diode/resistor sensors and 1
heater output. Approximately 10 m (33 ft) long. Requires 2 to use 4 sensors and 2 heaters.
Refer to FIGURE 7-1.
6201 † IEEE-488 Cable. 1 m (3 ft) long IEEE-488 computer interface cable.
CAL-336-CERT † Instrument recalibration with certificate.
TABLE 7-4 Accessories