Lakeshore 336, User Manual

Page: 157 / 192

6.6.1 Interface Commands 145
|
www.lakeshore.com
WARMUP Warmup Supply Parameter Command
Input
WARMUP <output>,<control>,<percentage>[term]
Format n,n,+nnn.nn
<output>
Specifies which unpowered analog output to configure: 3 or
4
<control> Specifies the type of control used: 0 = Auto Off,
1 = Continuous
<percentage> Specifies the percentage of full scale (10 V) Monitor Out
voltage to apply to turn on the external power supply.
Example WARMUP 3,1,50[term] —Output 3 will use the Continuous control mode, with a 5 V
(50%) output voltage for activating the external power supply.
Remarks The Output Mode parameter and the Control Input parameter must be configured
using the OUTMODE command.
WARMUP? Warmup Supply Parameter Query
Input
WARMUP? <output>[term]
Format n,+nnn.nn
<output>
Specifies which unpowered analog output to query: 3 or 4.
Returned <control>,<percentage>[term]
Format n,+nnn (refer to command for description)
WEBLOG Website Login Parameters
Input
WEBLOG <username>,<password>[term]
Format s[15],s[15]
<username>
15 character string representing the website username.
<password> 15 character string representing the website password.
Example WEBLOG “user”, “pass” —sets the username to user and the password to pass.
Remarks Strings can be sent with or without quotation marks, but to send a string that con-
tains spaces, commas, or semi-colons quotation marks must be used to differentiate
the actual parameter separator.
WEBLOG? Website Login Parameter Query
Input
WEBLOG?[term]
Returned <username>,<password>[term]
Format s[15],s[15] (refer to command for description)
Remarks Note that all strings returned by the Model 336 will be padded with spaces to main-
tain a constant number of characters.