Lakeland 31788, Instruction Booklet

Page: 13 / 64

13
• Depending on the programme, the time will change in different increments.
You can press and hold the or buttons to skip through quickly.
• If you have selected the ‘Multicook’ or ‘Deep Fry’ programmes, you can also adjust the
temperature. Press the TIMER/ t°C button, the default temperature will flash.
Use the and buttons to set your required temperature within the range for that
programme.
Note: Each programme has a different default temperature, see the table of Cooking
Programmes on (Pages 19-21) for the correct temperature of each programme.
Some programmes heat first, then beep when the cooking pot has reached temperature
and the timer will start to count down. The time it takes for the pot to reach temperature
can vary depending on the quantity of ingredients inside the cooking pot.
• Now, if required, you can set ‘Delay Start’ to start your cooking later (see Delay Start
instructions on Page 14).
• Press and hold the START/KEEP WARM/ON/OFF button for a few seconds until it
beeps to start cooking. The cooking icon will illuminate and rotate on the display and
the time and progress bar will start to count down the cooking cycle.
• On the ‘Rice’ programme the water will heat to temperature then the timer will start to
count down.
• You can carefully lift the lid and stir the ingredients when cooking recipes you would
normally stir.
• When cooking has finished the Multicooker will beep.