Lakeland 31788, Instruction Booklet

Page: 11 / 64

11
USING YOUR MULTICOOKER FOR THE FIRST TIME
Warning:
Do not insert the plug into a socket and turn on the Multicooker until you have
fully assembled it.
• Unpack the Multicooker, remove all the packaging materials, including the accessories
inside the cooker and the protective film on the steam vent.
• Before first use, wipe the outer surfaces and inside of the lid with a clean damp cloth.
• Wash the cooking pot and accessories in hot soapy water and dry thoroughly.
• Make sure that all parts are clean and dry before assembling the product.
• Place the Multicooker on a stable, heat-resistant work surface, at least 20cm away from
walls and at least 1 metre from the ceiling, to allow sufficient airflow. Never operate
the Multicooker under cabinets or lighting to avoid damage caused by steam, heat,
splashes and condensation.
• Put the cooking pot inside the cooker.
• Slot the spoon holder into
the slot on the side of the
Multicooker.
• This is for keeping the rice
spoon and ladle handy when
cooking.
• Slot the end of the power cord into the socket on the side
of the Multicooker.
• The Multicooker is now ready to use.
AUDIBLE BEEPS
Beeps will sound when the Multicooker is connected to a power supply, buttons are
pressed and the cooking cycle has finished.
To turn the audible beeps off, press and hold the
HOUR/MIN button for a few seconds,
the sound icon will go off on the display. Repeat to switch on again and the icon will
illuminate.
You cannot switch the audible beeps on or off during a cooking cycle or the delay start
function.