Laird ConnexLink CL2510, User Manual

Page: 6 / 28

3
www.lairdtech.com Laird Technologies
CL2510
RF Transceiver
TABLE 1: CL2510 DETAILED SPECIFICATIONS
INTErFACEs
serial Interface Connector
DB-9 Male (rs-232 DCE)
rF Connector rP-sMA Jack
Power Connector Center Positive 2.5 mm Jack.
OPErATIONAL
Network Topologies
Point-to-Point, Point-to-Multipoint
security One byte system ID
Number of Hopping Channels CL2510-050: 43
CL2510-100: 43 or 79, user selectable
Frequency Band 2400 MHz to 2471 MHz
rF Data rate 280 kbps or 500 kbps, user selectable
rF Technology Frequency Hopping spread spectrum
Output Power CL2510-050: 50 mW conducted
CL2510-100: 125 mW conducted
Maximum radiated power (EIrP) 100mW (CE), or 316mW (FCC) depending on
antenna and country of use
range Line of sight
(CL2510-050, with 2 dBi Antenna) Outdoor: 1.5 miles (2.4 km)
Indoor: 790 ft (240 m)
sensitivity -98 dBm at 280 kbps rF rate
-94 dBm at 500 kbps rF rate
ELECTrICaL/EnvIronmEnTaL
Supply voltage
+6 v to 30 v DC
Max Power 300 mW
Temperature (Operating) -40°C to 80°C
Temperature (storage) -50°C to 85°C
PHysICAL
Dimensions
4.4” x 2.7” x 1.4” inches (11.18 cm x 6.86 cm x 3.56 cm)
Weight 6 oz (170 g)
CErTIFICATIONs
FCC
yes: FCC ID: KQL-CL2510
IC yes: IC ID: 2268C-CL2510
CE Yes: CL2510-050 only : En300 328-2 v1.71,En301 489
roHs yes
SPECIFICATIONS
CL2510-050: 43
CL2510-100: 43 or 79, user selectable
Outdoor: 1.5miles (2.4km)Indoor: 790ft (240m)