19
www.lairdtech.com
Laird Technologies
CL2510
RF Transceiver
Test Results
The Test Results area is used to display the results of the test.
• Runs: The run number is incremented every time a test is completed, whether errors occurred or not.
• Errors: This is the number of errors that occurred while the test was being performed.
• Percentage Good: This is the percentage of test results that were successful.
• Approx.: This is a display of the approximate throughput of the radio. The application uses a rough
calculation to display the amount of data transferred in bits per second (bps).
• Time Remaining: This field is used to indicate how much longer the test will run. Depending on how
the test was initially setup, this field may display time, or if the test was set to run a specific number
of runs, it will display the number of runs that remain.
Port 1/Port 2
Displays the Tx or Rx activity for Port 1 and Port 2.
View Tx Packets/View Rx Packets
Allows you to switch between Tx or Rx packets in the Port 1/Port 2 display.
Clear Button
This button sets all of the statistics and errors back to zero. This can be used while a test is running.
TERmINAL/CHAT TAB
The Terminal/Chat tab is used to send small data packets between two COM ports. As data is received it is
appended to the appropriate Port window. An example of the Terminal/Chat tab is shown below.
Send Button
This button is used to send the data in the textbox out of the selected port(s). The current user’s Windows
username is also sent with the data.
ASCII Display
When selected, newly received data will be displayed in ASCII format.
Hexadecimal Display
When selected, newly received data will be displayed in Hexadecimal format.
CONFIgURATION
SOFTWARE
OVERVIEW
Summary of Contents for ConnexLink CL2510
Page 28: ......
