https://www.lairdconnect.com/
13
© Copyright 2022 Laird Connectivity
All Rights Reserved
Americas
: +1-800-492-2320
Europe
: +44-1628-858-940
Hong Kong
: +852 2762 4823
Figure 25: Change baud rate
7. Return to
Configure
tab.
Read
the radio again to confirm communications and that changes were written correctly to
the radio.
To set the test configurations, follow these steps:
1. Ensure the power supply is connected to both the client and the server radios.
2. Ensure the radios are at least five feet apart.
3. Verify both the green Pwr (Power) and red Link LEDs are lit on
both
units. This indicates they are linked (paired) and
ready to pass data.
Figure 26: Lit LEDs
