https://www.lairdconnect.com/
8
© Copyright 2022 Laird Connectivity
All Rights Reserved
Americas
: +1-800-492-2320
Europe
: +44-1628-858-940
Hong Kong
: +852 2762 4823
Figure 15: Verify COM port
To configure PC settings, follow these steps:
1. Open the Configuration and Test Utility (CU).
2. Click on the
PC Settings
tab to configure the following PC settings to enable you to communicate with the ConnexLink
Unit as shown in Figure 4.
a. If Select the product from the Product
drop-down menu.
b. Select the COM Port verified in
Device Manager from the drop-down
menu. If none are listed, click the
[Find Ports] button
c.
Default baud rate of 57600 should be
selected, but if it is known that the
unit has been configured to a
different baud rate, select it here.
Note:
If connecting to a previously
configured radio, set baud rate
to what is configured on the
radio.
d. Set Parity to None (recommended)
e. Set Handshaking to the following
–
depending on the interface:
RS232
: Hardware (recommended)
RS485
: None
f.
Set Data Bits to 8
g. Set Stop Bits to 1
Figure 16: PC Settings
