27
11
•
SETTING THE CORE PROBE
Premise
The core probe allows cooking regulated by
the product's core temperature. The oven
stops the cooking process as soon as the core
of the product reaches the set temperature,
without the need to set a cooking time.
The core probe can easily be used as a
portable thermometer. In fact, by inserting the
probe on connection
A1
with the oven in any
cooking time mode, if button
9
is pressed
for several seconds, display
10
will show the
probe temperature for a few seconds. This
makes it possible to check the temperature at
the core of the product when it is not being
cooked, and, therefore, outside the oven itself.
OPERATIONS
11.1
•
COOKING WITH THE CORE PROBE
Attention:
if cooking with the core probe and
the error message
“
Pin probe error
”
appears
on display
15
, you must connect the core
probe to connection
A1
. If the first cycle is
used for pre-heating, the probe pin must be
kept outside the cooking chamber; otherwise
the programme will not be able to start.
After setting the temperature in the cooking
chamber (as per the relevant chapters on
settings), press button
9
and turn knob
11
to set the desired core temperature. Attach
the probe to the connection
A1
, insert
the probe into the product (see chapter
"Recommendations for using core probe"),
and continue based on the cooking method
selected.
Consequently, you have chosen...
PRACTICAL EXAMPLE
Settings
Mode:
Convection
Cooking chamber temperature:
140 °C
Time:
Infinite
Core temperature:
78 °C
What happens
Once the core of the product reaches a
temperature of 78 °C, with the cooking
chamber temperature at 140 °C, heating will
stop and will automatically restart when the
core temperature reaches 1 °C.
In essence, heating is no longer based on
the cooking chamber temperature, but
rather works with the selected core probe
temperature.
90034270rev02
