laguna Fusion F3, Manual

Page: 25 / 68

Fusion F3 Table Saw - Setup - Front Rail 25
© 2020 Laguna Tools
Front Rail
The Fusion F3 table saw’s front rail assembly houses the front rail and guide ruler. In conjunction with the rear rail, the front
rail allows the fence to move fluidly across the table. The front rail assembly is made up of the left and right front rail
brackets, the front rail, and the control switch.
Before setting up your machine, organize all additional set-up tools.
Quick Reference Guide
Add. Required Tools:
·
Level
·
Allen Wrenches
· General Wrench
Troubleshooting/Tips:
Attaching the rubber feet to the rear extension legs before attaching the legs to the front
rail bracket will make for easier assembly.
Parts
REF Description Q Installation
Right Extension Legs 2 Front Rail Assembly
Front Rail Assembly
(Only the front rail
bracket is needed)
1 F3 Table
Left Side Front Rail 1
F3 Table
Rail
Body
Hardware
REF Description Q Installation
A
Counter-Sunk Alan Head
Screws (25mm)
use with hex nuts(F), flat
washers(H)
5 of 7
Front Rail Assembly, F3
Table
Also used to fasten
Right Extension Table
F Hex Nuts (13mm) 5 of 20
Front Rail Assembly, F3
Table