laguna Fusion F3, Manual

Page: 18 / 68

Fusion F3 Table Saw - Inventory List - 18
© 2020 Laguna Tools
Hardware Inventory
Listed below are all the hardware required for assembly of the Fusion F3 table saws. The hardware below has been
included in the Fusion F3’s packaging. As you inventory the other parts shipped with your machine, be sure to inventory and
familiarize yourself with the hardware listed below.
Ref. Description Q Installation
A
Counter-Sunk
Alan Head
Screws (25mm)
use with hex
nuts(F), flat
washers(H)
7
Front Rail
Assembly, F3
Table
Also used to
fasten Right
Extension Table
B
Socket head
Button Screw w/
Lock Washer
(28mm)
use with hex
nuts(F), flat
washers(H)
4
Rear Rail
Assembly, F3
Table
Dust collector
hose support, F3
Table
C
Hex Cap Screw
w/ Flat Washer
(longer)
5
Rear Extension
Table, F3 Table
Control Switch,
Left Front Rail
D
Socket Head Cap
Screw (no
washer) (28mm)
use with use with
hex nuts(F), lock
washers (E)
5
Rear Rail
Assembly, F3
Table
E
Hex Cap Bolt
(30mm)
use with hex
nuts(F), lock
washers (E)
2
Left Side Front
Rail Assembly, F3
Table
F
Hex Nuts (13mm) 20
Multiple