laguna Fusion F3, Manual

Page: 11 / 68

Fusion F3 Table Saw - Safety - 11
© 2020 Laguna Tools
f) Grounded, cord-connected tools intended for use on a supply circuit having a nominal rating less than 150 volts:
g) This tool is intended for use on a circuit that has an outlet that looks like the one illustrated in Sketch A in Fig. 1. The tool
has a grounding plug that looks like the plug illustrated in Sketch A in Fig. 1. A temporary adapter, which looks like the
adapter illustrated in Sketch B and C, may be used to connect this plug to a 2 pole receptacle as shown in Sketch B if a
properly grounded outlet is not available. The temporary adapter should be used only until a properly grounded outlet can
be installed by a qualified electrician. This adapter is not permitted in Canada. The green-colored rigid ear, lug, and the
like, extending from the adapter must be connected to a permanent ground such as a properly grounded outlet box.
h) Grounded, cord-connected tools intended for use on a supply circuit having a nominal rating between 150 – 250 volts,
inclusive:
i) This tool is intended for use on a circuit that has an outlet that looks like the one illustrated in Sketch D. The tool has a
grounding plug that looks like the plug illustrated in Sketch D. Make sure the tool is connected to an outlet having the
same configuration as the plug. No adapter is available or should be used with this tool. If the tool must be reconnected
for use on a different type of electric circuit, the reconnection should be made by qualified service personnel; and after
reconnection, the tool should comply with all local codes and ordinances.